2011年11月29日 星期二
中華電信100M/10M固6IP線路接Vigor 2920中華電信測試速度問題
Windows 7的筆記型電腦Notebook
Realtek PCIe GBE Family 網路卡
測試上傳下載
直接接中華電信可以TEST出96M/10M的速度
為何經過Vigor 2920之後測速只跑16M/10M的速度
答案是
請至
http://www.realtek.com/downloads/
更新Driver
因為Windows 7內建抓的Driver不夠新
只需要更新Driver速度就可以爬上去了
2011年11月28日 星期一
使用Windows 7如何打開Windows Firewall 的設定讓Vigor的Router Tools 順利更新Vigor 韌體
使用Windows 7如何打開Windows Firewall 的設定讓Vigor的Router Tools 順利更新Vigor 韌體
使用Vigor 的Router Tools 更新Firmware 一直出現連線逾時
這是因為Win 7 內建Windows Firewall Default 有打開的因素
因此需要變更Windows Firewall 的Rule
步驟請依順序進行
以上產品如果有其他問題
請洽本公司各區服務處
2011年11月25日 星期五
UBS-2108G 8 Port 10/100/1000 Gigabit VLAN On/Off Switch
UBS-2108G 全Giga 8 Port switch 台灣製造MIT
UBS-2008 10/100硬體式,經濟型vLan Switch的進階版
撥動 vLan 開關可以變成一般的Giga Switch
或是vLan Switch可以自由選擇
機器出廠預設值有打開vLan
網路上的芳鄰要互通請將vLan開關Disable
8-port SOHO VLAN Gigabit Ethernet Switch
8 Port 10/100/1000 Gigabit VLAN On/Off Switch
50M/5M 跟100M/5M 您需要使用UBS-2108G Giga 的Switch 更能發揮出他速度的效能
Default:vLan open,預設第一Port往前,底下各Port不互通
主晶片也是MIT的螃蟹晶片相容性很高
體積超小,可以任意擺放
* Transparent Plastic Case
* Auto-MDI/MDI-X
* Auto-Negotiation
* Non-Blocking
* Store and Forward
* Smart Plug and Play
* Pre-defined VLAN Per Port Feature
網路的救星
學生宿舍網路交換器的救星
出租套房專用Giga Switch交換器
學生宿舍專用Giga Switch vLan Switch 交換器
撥動 vLan 開關可以變成一般的Giga Switch
或是vLan Switch可以自由選擇
Standards | IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3x Flow Control |
Features | Number of Ports: 8 MAC Address: 4K Buffer Memory: 1024K bits Transmission Method: Store and Forward |
Filtering/Forwarding Rates | 1000Mbps port – 1,488,000pps 100Mbps port - 148,800pps 10Mbps port - 14,880pps |
Transmission Media | 10BaseT Cat. 3, 4, 5 UTP/STP 100BaseTX Cat. 5 UTP/STP 1000BaseT Cat. 5E UTP/STP |
VLAN Setting |
Multi to 1 Setting A special design for the switch into “VLAN Per Port“ of Port-Base VLAN. After power on, all ports can only connect to the port 1. |
Led Indicators | Per Port: Link/Act Per Unit: Power |
Power Requirement | DC 5V |
Power Consumption | 10 Watts (Max) |
Dimensions | 140 x 105 x 25 mm (L x W x H) |
Weight | 224 g |
Operating Temperature | 0 to 45℃ |
Storage Temperature | -20 to 90℃ |
Humidity | 10 to 90% RH (non-condensing) |
Certifications | FCC Class B, CE |
請洽本公司各區服務處
2011年11月21日 星期一
Vigor 2920系列設定成Bridge Mode
Vigor 2920系列設定成Bridge Mode
找台電腦安裝SmartMonitor可以直接當上網記錄器
原有網路架構都不需更改
設定很簡單
感謝Alan(阿斌mis339)分享
Vigor 2920
設定很簡單
步驟如下
Vigor 2920要更新到軔體版本 v3.3.7 才有此功能
先在區域網路把Lan埠號對映先開好
對映埠號是P4
被對應埠號是P1 , P2 , P3
先把遠端管理開好
系統維護
管理
允許從網際網路管理打勾起來
WAN端
網際網路我是設定固定IP
因為還可以從Wan端管理
這裏動作建議分兩次
先設定好固定IP
點一次確定
第二次再選Enable Bridge Mode
找一台電腦Windows XP安裝居易科技DrayTek Vigor所贈送的SmartMonitor
admin/admin
登入後先到System
Modify Admin
把他改成繁體中文
您看已經可以記錄了
可以記錄不少東西
FTP/HTTP/ICQ/MSN/P2P/POP3/SMTP/TELNET/WEBSMTP/Yahoo Message....
功能還在一直增加中
太強了 ^^
以上產品有其他問題
請洽本公各區服務處
2011年11月18日 星期五
Vigor 2750如何透過電話線設Bridge Mode兩端透通連接
Vigor 2750如何透過電話線設Bridge Mode兩端透通連接
兩端區段IP一樣 Bridge Mode
RJ45的網路線我們都知道他只能到達100公尺
但是我們的環境中有時後UTP RJ-45的網路線確實可能會超過100公尺
因此一堆人開始找網路線的Repeater
或是網路信號的延長線
或是網路信號的延長器
或是中繼Switch Hub
中繼器 Hub Repeater
網路線延長器
或是整個區域的社區大樓要建置網路環境
但是管線太小
或是大樓太過老舊
不想重新佈網路線
但是又想速度快一點
或是要節省佈網路線的工作時間和材料
或是網路中心離門口守衛室太遠
超過100公尺
佈光纖線又不方便的狀況下
Vigor 2750就可以當成網路信號的中繼器 Repeater
距離在300公尺內網路傳輸速度還可以到達上傳/下載對稱式100M/100Mbps
跟10/100的Switch Hub一樣的快
設定相當的簡單
Vigor 2750
一端為CO端 , 192.168.1.1
一端為CPE端 , 192.168.1.2
兩端都設Bridge Mode
透過電話線就可以透通了
Vigor 2750版本請更新到v1.5.1以上
xDSL的連線速度
協定 | 規範 | 下載 | 上傳 | 機型 |
ADSL | G.992.3/4 | 12M | 1M | Vigor2600 |
ADSL 2+ | G.992.5 | 24M | 3M | Vigor2800 |
G.SHDSL | G.991.2 | 1.3M/4.6M | 2.3M/4.6M | Vigor3100/3120 |
VDSL2 | G.993.2 | 100M | 100M | Vigor2750 |
VDSL的參數
Parameter | 8a | 8b | 8c | 8d | 12a | 12b | 17a | 30a |
Bandwidth MHz | 8.5 | 8.5 | 8.5 | 8.5 | 12 | 12 | 17.7 | 30 |
Tones D/S | 1,971 | 1,971 | 1,971 | 1,971 | 2,770 | 2,770 | 4,095 | 2,098 |
Spacing KHz | 4.312 | 4.312 | 4.312 | 4.312 | 4.312 | 4.312 | 4.312 | 8.625 |
TX Power D/S dBm |
+17.5 | +20.5 | +11.5 | +14.5 | +14.5 | +14.5 | +14.5 | +14.5 |
Min net Data Rate Mbps(上傳+下載) | 50 | 50 | 50 | 50 | 68 | 68 | 100 | 200(100+100) |
VDSL2安裝的距離
A<-->B兩點300公尺內可以跑到100M/100Mbps上傳/下載的速度
架構一, AB甲乙兩點長距離佈建
架構二, AB甲乙兩點高樓不同樓層佈建
版本要v1.5.1以上
192.168.1.1 admin/admin
VDSL
VDSL Setup
Operation Role : Server(CO Site)
Operation Mode : Bridge Mode
192.168.1.2 admin/admin
VDSL
VDSL Setup
Operation Role : Client(CPE Site)
Operation Mode : Bridge Mode
將兩台的DSL Port用RJ-11的電話線對接
你看就通了
以上產品如果有其他問題
請洽本公司各區服務處
2011年11月17日 星期四
Vigor2920 系列可以充份的使用每一個Wan的頻寬(動態分配頻寬) v3.3.7繁體中文版
Vigor2920 系列可以充份的使用每一個Wan的頻寬(動態分配頻寬) v3.3.7繁體中文版
兩條50/5M 如何發揮出他機器最大的效能
Vigor 2920 系列
Vigor2920系列含以上...
可以充份的使用每一個Wan的頻寬,動態分配頻寬
最聰明式的使用方法,能有效的發揮出頻寬分享的最大極限
Wan端頻寬有多快,每個IP都能取得最大的頻寬
當一個人使用時,可以完整的享受一個人飆網的快感
設定很簡單
WAN 基本設定
依照連線速度
兩條都填寫 50000/5000 Kbps
頻寬管理
NAT連線數限制
啟用
預設最大連線數
學生宿舍請填3000或以上(Vigor 2920系列整機到達50000個,如果要更大請挑選Vigor 3200可以到十萬個100,000連線數)
有另外開放或是管制更嚴僅的請填在限制清單
頻寬管理
頻寬限制
啟用
預設傳送限制(請依經驗值設定,最低200Kbps)
默認接收限制(請依經驗值設定)
允許自動調整取得最佳利用可用頻寬
有另外開放或是管制更嚴僅的請填在限制清單
在
自我診斷工具 >> 資料流量監控
Diagnostics >> Data Flow Monitor
可以看見有秀+的就表示他有取得多出的頻寬了
還有學生宿舍或是出租套房強烈建議要使用UBS-2008之類的硬體vLan Switch
請參考附件
以上如果有其他問題
請洽本公司各區服務處
附件
學生宿舍為何一定要用UBS-2008
http://www.ublink.org/index.php/component/content/article/10-ubs-switch/170-ubs-2008.html
2011年11月16日 星期三
MSN( Live Messenger )最底下動態廣主機URL,擋MSN廣告Vigor2920系列
MSN( Live Messenger )最底下動態廣主機URL,擋MSN廣告Vigor2920系列
上次寫了一篇For Vigor 2910
引起熱烈點閱
原來不是只有我覺得那廣告做成
Mouse滑鼠一不小心移到那邊廣告就跳出來
真是討厭
因此有網友來問那Vigor 2920系列應該怎麼設定
我們示範Vigor 2920 v3.3.7繁體中文版的設定方法
Vigor 2920
請依步驟前進
最主要要擋三個Domain
atdmt.com
rad.msn.com
rad.live.com
中間用空格
atdmt.com rad.msn.com rad.live.com
先設定
物件設定 >> 關鍵字物件設定
索引編號 : 1
再設定
數位內容安全管理 >> URL 內容過濾器設定檔
索引編號: 1
要自定跳出訊息內容的人
請在
數位內容安全管理 >> URL 內容過濾器設定檔
管理訊息
內定訊息如下
The requested Web page has been blocked by URL Content Filter.
Please contact your system administrator for further information.
挑選關鍵字物件
OK 阻擋成功
以上如果有其他問題
請洽本公司各區服務處
2011年11月15日 星期二
2011居易科技Vigor進階班(台中場)報名開始 ( 2011.12.03(六))
2011居易科技Vigor進階班(台中場)報名開始 ( 2011.12.03(六))
http://www.draytek.com.tw/user/AboutEventsDetail.php?ID=119
如有其他問題
請洽本公司各區服務處
2011年11月10日 星期四
2011年11月8日 星期二
VigorSwitch G1240 24 Port Full Giga With 4 Combo SFP
VigorSwitch G1240 24 Port Full Giga With 4 Combo SFP
VigorSwitch G1240
4 Dual Media ports for flexible fiber connection
QoS with four-level priority queues
Port Mirroring for monitoring network without breaking down data flow
802.1x Access Control for improving network security
Port trunk for balancing traffic load
Auto detect client idle or cable length for Power saving
802.1d compatible and 802.1w Rapid Spanning Tree
Technical Specification
- Standard Compliance
- IEEE 802.3x Flow Control Capability
- IEEE 802.1q VLAN
- IEEE 802.1p QoS
- IEEE 802.1w Rapid Spanning Tree
- IEEE 802.3ad Port Trunk with LACP
- Switching capacity
- 48Gbps Forwarding Bandwidth for Switch, Non-blocking Switch Fabric Wire Speed Performance
- 8 K MAC Addresses
- 500KB On-chip Frame Buffer
- Jumbo Frame Support to 9600 bytes
- Unknown Unicast / Multicast / Broadcast / Storm Suppression
- Port Mirroring
- VLAN
- Port-base VLAN
- IEEE802.1q Tag-base VLAN, 4094 Max, up to 24 Active VLANs
- In tag-base VLAN, Supports Egress / Ingress Packet Filter
- QoS
- Supports Port based, Tag based, IPv4 ToS and DSCP
- Supports 802.1p QoS with Four-level Priority Queue
- Supports Two Scheduling, WRR and Strict
- Bandwidth Control
- Supports Bandwidth Rating per Port Ingress and Egress Rate Limit 1000Mbps with 1Mbps Increment
- LACP/Port Trunk
- Port Trunking with 12 Trunking Groups
- Up to 12 Ports for Each Group
- Multicasting
- Supports IGMP Snooping
- Supports 802.1x Access Control for Multi-host Authentication for Port based
- Supports MAC based Authentication with Radius Server
- RFC 1213 MIB II
- RFC 1493 Bridge MIB
- RFC 2863 Interface Group MIB
- 24 x 10/100/1000Mbps Ports, RJ-45
- 4 x SFP Dual-media Ports (Shared with 4 Gigabit Ports)
- 1 x Reset Button
Technical Specifications of VigorSwitch G1240 | ||
Interface | 24 x 10/100/1000Mbps Ports, RJ-45 | |
4 x SFP Dual-media Ports (Shared with 4 Gigabit Ports) | ||
1 x Reset Button | ||
Standard Compliance | IEEE 802.3x Flow Control Capability | |
IEEE 802.1q VLAN | ||
IEEE 802.1p QoS | ||
IEEE 802.1w Rapid Spanning Tree | ||
IEEE 802.3ad Port Trunk with LACP | ||
Performance | Switching Capacity | 48Gbps Forwarding Bandwidth for Switch, Non-blocking Switch Fabric Wire Speed Performance |
8 K MAC Addresses | ||
500KB On-chip Frame Buffer | ||
Jumbo Frame Support to 9600 bytes | ||
Unknown Unicast / Multicast / Broadcast / Storm Suppression | ||
Port Mirroring | ||
VLAN | Port-base VLAN | |
IEEE802.1q Tag-base VLAN, 4094 Max, up to 24 Active VLANs | ||
In tag-base VLAN, Supports Egress / Ingress Packet Filter | ||
QoS | Supports Port based, Tag based, IPv4 ToS and DSCP | |
Supports 802.1p QoS with Four-level Priority Queue | ||
Supports Two Scheduling, WRR and Strict | ||
Bandwidth Control | Supports Bandwidth Rating per Port Ingress and Egress Rate Limit 1000Mbps with 1Mbps Increment | |
Protocol | LACP/Port Trunk | Port Trunking with 12 Trunking Groups |
Up to 12 Ports for Each Group | ||
Multicasting | Supports IGMP Snooping | |
Network Security | Supports 802.1x Access Control for Multi-host Authentication for Port based | |
Supports MAC based Authentication with Radius Server | ||
SNMPv1, v2C Network Management | RFC 1213 MIB II | |
RFC 1493 Bridge MIB | ||
RFC 2863 Interface Group MIB | ||
Power | 100~240 VAC, 50~60 Hz | |
Operating Temperature | 0 to 40 °C | |
Humidity | 10 to 90% RH (non-condensing) | |
Dimensions | 44(H) x 442(W) x 170(D) mm | |
Weight | 2.4 kg |
Front Panel
4 Dual Media ports for flexible fiber connection
以上產品如果有其他問題
請洽本公司各區服務處